Vickers hardness rating scale
Archaeometallurgy, Guidelines for Best Practice, published by Historic England in 2015, defines hardness as: ‘…a measurement of the strength of a material (its ability to resist plastic deformation).’
The Vickers hardness test can be used to measure the hardness of all materials including metals, ceramics and so on. It is also referred to as a microhardness test method (since it only requires a small test sample) and is based on an optical measurement system.
Vickers Hardness (HV) is calculated by measuring the diagonal lengths of an indentation produced by a diamond pyramid indenter on small samples that have highly polished surfaces. The lengths are measured to determine the hardness, which is based on a table or formula. Results are measured in units of hardness known as the Vickers Pyramid Number (HV).
[edit] Related articles on Designing Buildings Wiki
Featured articles
Check out some of the best features and news from Designing Buildings as well as key stories from around the web.
The importance of early engagement
Construction lessons from the Trillium HealthWorks Experience Centre.
Mayors are to be given planning call in powers
Mayors across England will be able to make the most important planning decisions.
The Master Builder: William Butterfield and his times. Book review.
Why construction can't afford to ignore the skills gap.
Building Safety Regulator, 19 August
Gill Kernick appointed Independent Chair of Residents’ Panel.
Connecting knowledge, technology and conservation
Building competence for the future of built heritage.
Building Regulations and Building Safety Act
CIOB publishes free advice for non-domestic clients.
Building Safety Newsletter from MHCLG.
An extraordinary record of steel engineering worldwide.
Households living near new pylons to save on bills.
ECA warns growth must not outpace grid capacity or skills.
The role of the client and decision making
CIOB response to built environment professions call for evidence.